Logo And Trademark Use Guidelines

FSI International's logo and trademarks are valuable corporate assets and that is why we require our logo and trademark usage to follow the restrictions identified below. The FSI logos and images found on this site must be used according to the guidelines. Any use of the artwork beyond these guidelines is prohibited.

Guidelines and Restrictions for Using the Logos

• The logos may only be used in proximity to, or connected with a published material about FSI International, Inc. or a specific FSI product (or service).
• The logos may not be copied, distributed or used apart from the material, article or news commentary about the company or the product or service. Therefore, you may not redistribute the logo in hard copy or electronic form or make it available online for others to copy.
• The logos must be used as provided by FSI with no changes, such as, but not limited to, changes in the color, proportion, or design, or removal of any words, artwork, or trademark symbols. The logos may not be animated, morphed or distorted in perspective or appearance.
• To properly present a logo, a minimum clearance between the logo and other elements must be maintained. For example, the amount of space around the logo should be at least equal to 1/2 the height of the logo (including the wording).
• The logo must stand alone and may not be combined with any other object, including, but not limited to, other logos, words, graphics, photos, slogans, numbers, design elements or symbols.

Guidelines and Restrictions for Using Trademarks in Text

Please use FSI trademarks properly and see the list of FSI product names for correct usage.

• Using the registered trademark or trademark symbol ("®" or "™") at the upper right corner or baseline immediately following the trademark.

Example: ZETA® Spray Cleaning System. This symbol should be used at the first or most prominent mention.

Using the correct generic name or descriptor immediately after first mention of the trademark in text. This shortened version can only be used after the full name is mentioned previously in the text.

Example: ZETA® System

If possible, including the following notice on materials referencing the trademarks:

Example: ZETA® is a registered trademark of FSI International.

• You should not abbreviate any of the trademarks in text.

Example: ZETA® SCS for ZETA Spray Cleaning System.

FSI Product Trademarks

Surface Conditioning Products

ANTARES® CX Advanced Cleaning system
ArgonClean™ Process
AspectClean™ Process
DIO₃ Generation Module
EXCALIBUR® 2000 Vapor HF Etching System
FlashClean™ Advantage
HELIOS® DI Water Heater
MAGELLAN® Immersion Cleaning System
MERCURY® Spray Cleaning System
ORION® Dry Cleaning Module
STG® (Surface Tension Gradient) Rinse/Dry Technology
SymFlow® Technology
YieldUP® 2000 STG® Rinse Dry Module
YieldUP® 2100 STG® Rinse Dry Integration Module
YieldUP® 4000 Immersion Etch System
ZETA® Spray Cleaning System

Microlithography Products

POLARIS® 2500 Microlithography Cluster
POLARIS® 3500 Microlithography Cluster
Refresh Program™

back to top