Logo and Trademark Usage Guidelines
Corporate Trademarks
Always Thinking. Better.™
FSI Knowledge Services™ Seminar Series
Surface Conditioning Products
ANTARES® Cryokinetic Cleaning System
ArgonClean™ Process
AspectClean™ Process
DIO3 Generation Module
EXCALIBUR® 2000 Vapor HF Etching System
FlashClean™ Advantage
HELIOS® DI Water Heater
MAGELLAN® Immersion Cleaning System
MegaLens™ Acoustic Diffuser
MERCURY® Spray Cleaning System
N2Clean™ Process
ORION® Single Wafer Cleaning System
PlatNiStrip™ Process
STG® Rinse Dry Technology
SymFlow® Technology or SymFlow® Process
ViPR™ Technology or ViPR™ Process
YieldUP® 2000 STG® Rinse Dry System
ZETA® Spray Cleaning System
POLARIS® Systems and Services
AutoTeach™ Upgrade
Instacure® Module
POLARIS® 2500 Microlithography Cluster
POLARIS® 3500 Microlithography Cluster
Refresh Program™
TTU™ Hotplate Technology
Proper Usage of FSI Product Trademark Names
The proper use of FSI’s trademarks and product names is important. Please be sure to use FSI and its product names properly and with the correct markings and capitalization in ALL documentation, internal and external correspondence, notices/bulletin boards, machine labeling, etc. Remember trademarks are generally adjectives and not nouns. They describe a tool, product, or system.
Written Text
Examples of written text include brochures, manuals, presentations, work instructions, technical reports, bulletins, datasheets, and general correspondence. Complete product naming should always be used as follows:
- The product name should always be in capital letters.
Examples: ZETA® System
MAGELLAN® System - The first time the product name is used in the document, you must include the registered mark ® or unregistered mark ™ in superscript. For use in electronic documents, where the document can be downloaded, such as on FSI’s website or PowerPoint presentation, the registration mark needs to be used in all instances.
- If you don’t have the or on your computer, indicate the Company trademark by using an asterisk and footnote at the bottom of the page.
Examples: ZETA* System
Footnote at the bottom of the page: * Registered trademark of FSI International, Inc. - Listing must include the product name, trademark registration, and the product descriptor.
Examples of complete and proper use:
ZETA® Spray Cleaning System
ZETA® System
MAGELLAN® Immersion Cleaning System
MAGELLAN® System
Note: It is incorrect to use the trademark as a noun or to use it to describe something other than the equipment.
Correct: ZETA® System engineer
Incorrect: ZETA® engineer
Tip: You can set-up Microsoft Word to automatically replace, say, “ZETA” with “ZETA System” by using the Auto Correct Feature under the Tools menu.
Engineering Documentation (Prints)
- In the “Notes” area of a print, this statement should be included: “XXXXXX (FSI product name) is a registered trademark of FSI International, Inc.”
Example: ANTARES is a registered trademark of FSI International, Inc. - The first use of the product name should include the registered mark or ®.
Example: ANTARES® CryoKinetic Cleaning System. (For the first use of the product name, assume the print is read from position A1.) - Abbreviated use of a product name is discouraged, but due to field space limitations, abbreviations may be used. If there is no field limitation, use the complete product name. If the abbreviated example is used, define its meaning within the Notes section of the drawing.